Making your own LED grow light system will save you a massive amount of money. Instead of paying hundreds of dollars, you might only pay 10% of that. In order to create one, you will have to set aside many hours to build it, and even then your efforts may not turn out to be fruitful.
There will be some parts that you will need in order to make the system a reality. The most expensive is likely going to be the power supply. Don’t skimp out on the power supply cost, since cheap ones don’t really last long. You will also need LED lights, wire, and some electronics items such as a transistor and a few resistors for the circuit.
Like any good plan, you must write down what you are planning to build in order to make it work correctly. It’s best if you have some graph paper and a pencil to do it on, just so there is no confusion on what you are making. If you don’t know electronics technology, you should look on the Internet for symbols used to construct your logic diagram. If you do it properly, you shouldn’t have a problem building it.
Once everything is drawn out, you will need a small circuit board to keep things in place. These circuit boards are very cheap and can be found at local electronics stores, such as a RadioShack. You will need to solder all of the points together correctly, and don’t forget to test your circuit by leaving it on for several hours. If all seems well, we are on to the next step!
The next step is to consider which form of installation you plan on using. You could fix the board inside of the plastic tub purchased earlier, so that you have a directional light that doesn’t interfere with other parts of your room. You can also skip this step and instead have the LED circuit illuminate the entire area, which is great if the room is closed off and only used for indoor gardening.
Upgrading your circuit is a fine idea once you finish it. If your indoor operation is large, you will probably be making several of these circuits. If you can streamline the process once you find a design you like, you can take as little as 10-15 minutes to make an entire set. You could have lighting for your entire garden in just an hour!
In Conclusion
There are stores that sell these sets and kits already, so look into buying an already made LED growth system. You will save time, and maybe even money if you aren’t an expert at electronics technology. Shipping is also fast- so you can have it delivered in just days.
Learn more on and .
